1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for large current 2013.11.11 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. emifil r (capacitor type) single circuit type for large current nfm31p series (1206 size) c dimensions 3.20.2 1.60.2 1.30.2 (1) (2) (2) (3) 0.30.2 1.10.3 0.40.3 1.60.2 0.40.3 (in mm) : electrode c insertion loss characteristics (main items) frequency (mhz) 0.1 1 10 100 1000 6000 100 60 80 40 20 0 (50 - 50 ) insertion loss (db) nfm31pc276b0j3 c equivalent circuit input (output) (1) output (input) (3) (2) gnd no polarity. c packaging code packaging minimum quantity l 180mm embossed tape 3000 b bulk(bag) 500 c rated value ( p : packaging code) part number capacitance rated current rated voltage insulation resistance (min.) operating temperature range nfm31pc276b0j3 p 27f 20% 6a 6.3vdc 20m ohm -40 to +85c number of circuit: 1 c ! caution/notice ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|
